service 1 5 拷贝.jpg

Cleaning methods and precautions for stainless steel handcarts

Stainless steel trolleys, also known as wire mesh trolleys, are made of carbon steel/stainless steel frames, wire mesh panels, steel columns, and anti-static nylon wheels. The four corners of the wire mesh panels are equipped with adjustment clips and adjustment grooves, making them lightweight and flexible. The steel columns have recessed grooves every inch that mate with the protruding coils on the connecting plates, allowing for height adjustment as needed and effective discharge of static electricity. They are quick to adjust and easy to use.

Cleaning methods and precautions for stainless steel handcarts : The following information is provided by Jintou.com editors:

Cleaning is as follows:

1. Take care to avoid scratching the surface. Do not use rough or sharp materials to clean the stainless steel surface, especially mirror finish. Use a soft cloth that does not easily shed. For sandblasted and brushed surfaces, wipe along the grain, otherwise it is easy to scratch the surface.

2. Avoid using detergents containing bleach or abrasives, steel wool, abrasive tools, etc. To prevent residual detergent from corroding the stainless steel surface, rinse the surface with clean water after washing.

3. For stainless steel surfaces with dust or easily removable dirt, use soap or mild detergent to wash them. For adhesive residue, use alcohol or organic solvents (ether, benzene) to wipe them clean.

Precautions:

1. For grease, oil, and lubricant contamination on stainless steel surfaces, it is best to wipe them clean with a soft cloth, and then wash them with a neutral detergent, ammonia solution, or a special detergent.

2. If there is bleach or various acids adhering to the stainless steel surface, it should be rinsed with water immediately, then soaked in ammonia solution or neutral sodium bicarbonate solution, and washed with neutral detergent or warm water.

004

Cleaning methods and precautions for stainless steel handcarts

3. Rainbow patterns on stainless steel surfaces are caused by excessive use of detergent or oil. They can be removed by washing with warm, neutral water.

4. Rust caused by dirt on the stainless steel surface can be cleaned with 10% nitric acid or an abrasive detergent, or with a specialized cleaning agent. Using the correct maintenance methods can extend the lifespan of your stainless steel handcart and maintain its clean, bright, and elegant appearance.

发表评论

您的邮箱地址不会被公开。 必填项已用 * 标注